Car body is the most important and expensive part of the car, so you should pay particular attention to its preservation. In operation violated coatings, and may also be minor injuries glass panels, bottoms and carrying out body parts. Adverse effects on the body have products of combustion and pollution emitted into the atmosphere by industry, chlorides, and sprinkle on the road in winter, as well as sunlight and fluorescent light. Sharp fluctuations in temperature cause the appearance of small cracks and peeling coatings, which are then transformed into hotbeds of corrosion. To reduce the harmful effects on the body, it is necessary to perform the operation on care of it. Work in caring for the bodywork. Washing of the body should be carried out immediately after the visit of cold or slightly warmed water. Before washing close all windows, doors, hood and trunk lid, and ventilation hatches. Car wash at the special washer or installing a hose outdoors in the shade. It is recommended to wash the body with a hose running water with a little pressure not to scratch the paint. Dried mud you can not scrape off, as this form scratch - mud soaked first, then wash off. After washing the car or wipe dry in the shade. Do not use during washing soda, gasoline, kerosene and mineral oils. The body, heavily contaminated with grease or bitumen, cleaned with special cleaners. Paintwork body polish to restore its luster. Before polishing the body is clean and dry rubbed. Then the surface is applied a thin layer of polishing composition, and after drying, polish with drills and polishing spinning out of cloth or flannel. In an extreme case, polishing can be done manually flannel wool. Paintwork is reduced in the following order. Damaged area is carefully cleaned of traces of rust and old paint mechanically, using metal scrapers, wire brushes, sandpaper, or sandblasting unit. Further grinding ensure a smooth transition from the painted surface to an unpainted and the damaged area is applied coat of primer. After drying, the primer surface shpaklyuyut, dried and re-sanded, then applied a coat of paint a paint sprayer. For painting small lesions can be used synthetic enamel and nitrocellulose. The bottom of the car and the wings podkrashivayut special mastic. Care chrome accents is the regular cleaning of contamination from a rag soaked in kerosene, then in water and rub dry. In the case of the formation of corrosion on the chrome-plated to remove them with chalk and the damaged area to cover the transparent varnish. Care of rubber seals and body padding is rubbing seals with a cloth soaked in a technical glycerin. Upholstery wash soapy water followed by wiping with a clean flannel. Stains on the upholstery removed gasoline. For cleaning heavily contaminated sites upholstery use special cleaners and vacuum cleaners.
No comments:
Post a Comment